The process of ladle cold maintenance

The process flow of cold maintenance of ladle is: The hot maintenance ladle has to be stopped → Move the ladle to repairing area → Remove the working layer → Mansory → Move the ladle to sintering platform. Please pay attention to the following matters during this process:

1.Check the nominal dimensions of all the shaped refractories to see if they are up to standard.

2.When removing the working layer, make sure there is no steel remaining. Record the damage condition of each area, when the thickness of any area of the working layer is less than 70mm, the working layer should be stopped using.

3.During mansory, check to see if the wellblock is flat, make sure the remaining mortar of permanent layer is cleaned out or repaired before constructing the working layer, the gap between each two fire bricks should be less than 1mm, make sure the last brick of each circle is bigger than half brick.

4.Avoid being hurt by crane, objects, high temperature, etc.

There have many kinds of refractory products in our factory. What's more, there have many refractory news and refractory information in our website. Welcome to view our website and contact us anytime.

Article Source: The process of ladle cold maintenance
Company name: Henan Xinmi Changxing Refractory Materials Co.,Ltd?
Email: sales1@chinafirebrick.com
Website:http://www.chinafirebrick.com/