About construction of refractory bricks

 

Masonry refractory bricks should be designed to avoid the following erroneous operations.

1) Misplacement: brick and brick dislocation
2) Tilt: not parallel to the axial direction
3) Climbing: There is a regular unevenness on the circumferential surface, which should be controlled within 1mm.
4) From the middle: the bricks in the masonry are not the same as the cylinder
5) Zhangkou: small and large inside the gray joint in the annular masonry
6) Empty: Refractory mud is not full between bricks and bricks
7) Snake shape: radial seam, circumferential seam is not straight and wavy
8) Inverted size head
9) Severely missing corners
10) Masonry drum kit: belonging to equipment deformation or cleaning of the inner surface of the cylinder is not clean
11) Hair seam: iron plate exposed or fire mud is not hooked, brick surface is not clean
12) Mixing: Misuse of mud is not allowed

We Changxing Refractory Material Co.,LTD is professional manufacturer and supplier of refractory materials for more than 30 years. Our high quality refractory products are good sold to many countries say South Africa, Bangladesh, Indonesia, Malaysia, etc. Shall any interests, welcome to contact us. Our team would make best to be your reliable partner!

Article Source:About construction of refractory bricks
Company name: Henan Changxing Refractory Materials Co.,Ltd
More refractory products:https://www.cxrefractories.com/en-product-solution
Email:info@cxrefractories.com
Website:https://www.cxrefractories.com