2022年9月22日星期四

How to choose insulation bricks

 How to choose insulating bricks Insulation bricks used in thermal equipment can greatly reduce heat loss and furnace weight and improve thermal efficiency and labor productivity.

For most thermal equipment, in order to save energy and improve working conditions, thermal insulation is necessary. However, for some equipment insulation is not necessary because of the pros and cons of thermal insulation. Therefore, the actual situation and the performance of thermal insulation bricks should be considered when selecting suitable thermal insulation bricks.

The thermal insulation bricks can be divided into the following types:

1) Fireclay insulation brick GB/T 3994-2005

2) High alumina thermal insulation brick

3) Mulite insulation brick

We Changxing Refractory Material Co.,LTD is professional manufacturer and supplier of refractory materials for more than 30 years. Our high quality refractory products are good sold to many countries say South Africa, Bangladesh, Indonesia, Malaysia, etc. Shall any interests, welcome to contact us. Our team would make best to be your reliable partner!

Article Source:How to choose insulation bricks
Company name: Henan Changxing Refractory Materials Co.,Ltd
More refractory products:https://www.cxrefractories.com/en-product-solution
Email:info@cxrefractories.com
Website:https://www.cxrefractories.com



2022年9月18日星期日

Japan to close over 7 million tons of blast furnace capacity within two years

 In recent years, due to slowing steel demand, Japan has been shutting down blast furnaces or pushing to decommission older blast furnaces, and has committed to operational optimization, focusing on more competitive assets and products.

In September 2020, Nippon Steel Corporation, Japan's largest steel manufacturer, decommissioned its 1.5 million t/y (2,150m3) blast furnace No. 2 at its Kyushu plant (Yawata). Previously, blast furnace No. 2 was mothballed as part of a temporary production reduction plan due to a sharp drop in steel demand due to the new crown pneumonia epidemic. Meanwhile, Nippon Steel suspended operations at a smelting plant at its Kyushu plant, including bloom production facilities. In September 2021, Nippon Steel will completely shut down the upstream and midstream facilities of the Setouchi Plant (Ku), including the 2 million tons/year No. 1 blast furnace (2650m3) and the 1.6 million tons/year No. 2 blast furnace (2080m3). At the same time, the company also shut down a blast furnace (3700m3) with a capacity of 2.1 million tons/year at its Kansai plant (Wakayama).

Japanese steelmakers will continue to shut down blast furnaces. JFE Steel plans to close its refractory raw materials, steelmaking and rolling divisions at its East Japan plant (Keihin) in September 2023. Among other JFE Steel facilities, the 4.2 million tonne/year No. 2 blast furnace, a converter steelmaking workshop for slab production and an electric furnace steelmaking workshop for billet and bloom production will also cease operations. Nippon Steel plans to decommission a 4.2 million ton/year blast furnace (5270m3) at the East Japan Plant (Kashima) in early 2025, which will be the company's fifth blast furnace to be deactivated based on a capacity optimization plan.

In 2020, the No. 5 blast furnace of JFE Steel's West Japan Plant (Fukuyama) with a capacity of 3.6 million tons/year will be put into operation, and the expansion and upgrade of the 3.8 million tons/year No. 4 blast furnace of the West Japan Plant (Kurashiki) will be completed in 2021. However, the new capacity cannot fully compensate for the withdrawal of production capacity. It is estimated that Japan has withdrawn more than 7.3 million tons/year of ironmaking capacity since 2020, while the newly added capacity is about 4 million tons/year. An additional 8.4 million tonnes/year of ironmaking capacity will be shut down by 2026, following the successful implementation of planned projects.

Under the general trend of decarbonization, Japan may continue to reduce steel production capacity. However, it is difficult for Japan to completely abandon the mainstream blast furnace-converter production route, because there are certain difficulties in introducing a more sustainable DRI-electric arc furnace route, including the high cost of imported energy. Currently, the Japanese government and steelmakers are formulating a decarbonization roadmap and developing decarbonization technologies with the aim of significantly reducing their carbon footprint while preserving traditional production methods.

We Changxing Refractory Material Co.,LTD is professional manufacturer and supplier of refractory materials for more than 30 years. Our high quality refractory products are good sold to many countries say South Africa, Bangladesh, Indonesia, Malaysia, etc. Shall any interests, welcome to contact us. Our team would make best to be your reliable partner!

Article Source:Japan to close over 7 million tons of blast furnace capacity within two years
Company name: Henan Changxing Refractory Materials Co.,Ltd
More refractory products:https://www.cxrefractories.com/en-product-solution
Email:info@cxrefractories.com
Website:https://www.cxrefractories.com



2022年9月14日星期三

Hot repair of EAF bottom ramming material

 

Hot repair of EAF bottom ramming material

1.Gradually reduce the loading amount. The last EAF of steel will completely discharge the molten steel. Immediately after tapping, the surface to be repaired is purged with oxygen, which is the key to affecting the repair of the entire EAF bottom.

 

2.Hoist the ramming material until the repaired surface falls, and move the crane to make it distributed reasonably. Hang in heavy objects for compaction.

 

3. The magnesia ramming material is used in a hot state, and the operation is convenient. The EAF slope of the magnesia-carbon brick slag line is maintained by the gunning process. After hot repair, it should be oven for more than 20min.

We Changxing Refractory Material Co.,LTD is professional manufacturer and supplier of refractory materials for more than 30 years. Our high quality EAF gunning material are good sold to many countries say South Africa, Bangladesh, Indonesia, Malaysia, etc. Shall any interests, welcome to contact us. Our team would make best to be your reliable partner!

Article Source:Hot repair of EAF bottom ramming material
Company name: Henan Changxing Refractory Materials Co.,Ltd
More refractory products:https://www.cxrefractories.com/en-product-solution
Email:info@cxrefractories.com
Website:https://www.cxrefractories.com